Modern LED Outdoor Wall Lamp

There is a real difference between an entrance that looks designed and one that looks floodlit. The Modern LED Outdoor Wall Lamp lands firmly on the right side of it. Its shade throws light up and down the wall rather than out into your eyes, so brick, render or timber gets shape and shadow, and the entrance feels considered.

With a round or square body in five colors and a 9W LED behind a sealed diffuser, it is a quiet, practical fixture for doors, porches and garden walls.

Shape and shadow, not glare

Light aimed along a wall grazes the surface, which is what brings out texture. A brick wall gains depth, render looks soft and smooth, and timber cladding shows its grain. Light aimed outward does the opposite, flattening everything and dazzling anyone walking up.

Because the beams stay close to the wall, this lamp can sit at eye level beside a door without discomfort. The sealed diffuser softens the LED, so the source itself is never harsh to look at.

A choice of five colors

Choose gray, green, brown, white or black, in a round or a square body. Green and brown suit gardens, hedges and timber, where the fixture can settle into its surroundings. Gray and black suit render, concrete and modern exteriors. White blends into pale walls, so only the light is noticed.

Colors may vary slightly from what a screen shows, which is worth remembering when matching a fixture to paint or trim.

Size and build

The square version is 5.12 inches wide and 3.07 inches deep, on a mounting bracket 4.4 inches across. The round version is 5.51 inches in diameter and 3.07 inches deep, on a bracket 4.8 inches across, as listed in the Dimensions section.

It is die cast aluminum with a powder coated finish and a sealed diffuser over a 9W LED, so there is no bulb to fit or replace, and it is rated for exterior use.

Where it works

• Front doors. A pair either side at 9W looks balanced, not overpowering.
• Porches. Soft light on the wall beside the seat.
• Garden walls. Green or brown settles into planting.
• Garage fronts. A row gives a wide wall rhythm.
• Modern facades. Square bodies echo crisp lines.

Installing it

One wall light is included with its mounting plate, along with all required hardware and installation instructions, in the shape and body color you select. It is hardwired, so turn the power off at the breaker before starting, and installation by a qualified electrician is recommended.

• Decide the height first, and keep it the same either side of a door.
• Fix the mounting plate, then seat the body onto it.
• Check the wash of light on the wall after dark.
• Match the shape and color across the whole property.

Care and pairing

Wipe the lamp with a soft, dry cloth and dry it immediately. Do not use abrasive cleaners on the powder coating, and switch off at the mains before cleaning.

For more fixtures like this, browse the outdoor wall sconces collection, or see the wall washer lights collection for lights made to graze a whole surface. Path lights at ground level complete the scheme.

Color is the detail worth thinking hardest about. Most outdoor lights come in black, and black is a safe choice, but a brown or green body against timber cladding or a hedge can look far more at home. Matching the fixture to the wall, rather than contrasting with it, keeps the focus on the light.

Pairs work well at a front door. Two lamps at the same height either side give the entrance symmetry, and at 9W each they light the threshold without turning it into a stage.

On a longer wall, three or four lamps at even spacing create a gentle rhythm of light. Keep the shape and color the same along that run so the pattern reads clearly.

Height is worth settling before anything is drilled. Beside a door, roughly eye level suits most walls: the wash reaches up and down far enough to show the surface, and the diffuser stays out of anyone's eye line. A little higher works on a garage or a broad facade, where the light has more wall to travel over.

It is also worth thinking about the wall itself. Rough brick and stone catch a grazing beam and throw small shadows, which gives the wash texture. Smooth render reflects it evenly for a softer, cleaner effect. Neither is better, but knowing which you have makes it easier to picture the result before the lamp goes up.

Taking a photograph of the wall at dusk also helps, because it shows where the dark spots really are before anything is fixed.

Is this wall lamp right for your home?

This wall light is a good fit if you:

• Want an up and down wash rather than a floodlit entrance.
• Like choosing between a round and a square body.
• Need a color that matches your walls or trim.
• Can have an electrician install a hardwired fixture.

It is an accent and entry light rather than a security light. For broad light over a driveway, a flood light will do more.

Every order ships free across the US and most arrive in 6 to 9 business days. Unused items in their original packaging can be returned within 30 days, and questions sent to info@norafurnish.com are answered in 1 to 2 business days.