LED Strip Lights
About LED Strip Lights
LED Strips That Draw a Line of Light Anywhere
LED strip lights turn edges into light sources. Stuck under a kitchen cabinet, behind a TV, along a shelf or around a desk, a thin strip gives even, hidden light that no lamp can match. Our range covers color changing neon strips and neon tape, chasing flow strips that animate along their length, a color sync TV backlight, a USB monitor light strip sized for 24 to 34 inch screens, addressable pixel strips for makers, flexible EL wire, and a trimless magnetic linear profile for a clean, built in look.
Before You Buy
- Measure the run: Measure every surface you want to light and add a little extra. Most strips can be cut only at marked points, so plan joins at corners.
- Know RGB from RGBIC: RGB strips show one color at a time along the whole length. RGBIC strips can show several colors at once for flowing, rainbow effects.
- Check the power: USB strips suit TVs and monitors. Longer runs need a wall adapter, and addressable WS2812B strips need a compatible 5V supply and controller.
- Consider moisture: Several pixel strips come in IP65 and IP67 versions for damp spots. Choose those over a standard IP30 strip for a covered porch or a spot near the kitchen sink.
Placement tip: Before sticking a strip down, clean the surface with rubbing alcohol and let it dry completely. Adhesive holds far better on clean, dust free surfaces, and mounting clips help on rough or textured spots.
For layouts and installation advice, read our LED strip lights guide. Lighting a patio or deck instead? See outdoor LED strip lights.
Common Questions About LED Strip Lights
Most strips can be cut, but only at the marked cut lines, which are usually printed right on the strip. Cutting anywhere else can stop that section from working. Neon style strips and EL wire vary, so check the product details first.
Strong adhesive can lift paint when removed, especially from fresh or flat finishes. If you rent, use mounting clips or test a small piece in a hidden spot first. Peel slowly at a low angle when taking a strip down.
It is a strip mounted on the back of a TV that throws light onto the wall behind the screen. Color sync models change color to follow what is on screen. A gentle glow behind the TV also softens the contrast between a bright picture and a dark room.
