Solar security lights have one common weakness: the spot that needs light is often the spot that gets no sun. A door under a deep porch, a shaded side passage or a north facing wall can all leave a built in panel starved of charge. The Solar Motion Sensor COB Wall Light solves this with a separate panel on a long cable.
The light goes where it is needed, the panel goes where the sun is, and a 16.4 foot cable joins them. It switches on with motion, charges itself by day and needs no wiring to the house. That flexible design is what makes it such a good motion sensor wall light.
What makes the COB light stand out
The long cable comes first. The solar panel measures 5.2 by 5 inches and connects to the light on a 16.4 foot cable. You can mount the light under an eave or over a door, and put the panel on a sunny wall, a fence top or the roof.
The COB options are the second strength. You can choose one, four or six COB panels. More panels mean more output and a wider spread, so you can match the light to a small side door or a larger yard.
The simplicity is the third. The rechargeable battery is built in, so there is no wiring to the house and no batteries to buy. The light housing is compact at 5.8 inches wide and 5 inches high, so it fits neatly on a wall or a fence.
Where it looks best, around the home
- Covered porches. Light under the roof, panel out in the sun.
- Side passages. Light in a shaded walkway between buildings.
- Back doors. Brightens the step when you walk up.
- Sheds and garages. Light where there is no power supply.
- Fences and gates. A compact light that wakes as you pass.
- Driveways. The six COB version covers a wider area.
Because the panel can go anywhere within reach of the cable, this light works on shaded walls where most solar lights would struggle.
Choosing the version and placement
The light housing measures 5.8 inches wide and 5 inches high, and the panel measures 5.2 by 5 inches.
- Choose one COB for a side door, a shed or a gate.
- Choose four COB for a back door, a patio or a small yard.
- Choose six COB for a driveway or a larger area.
- Place the panel where it gets direct sun for most of the day.
Plan the cable route before you start. Measure the distance from the light to the panel spot to be sure the 16.4 foot cable reaches. Run the cable along a wall, an eave or a fence, fix it neatly, and make sure it is not pinched by a window or a door.
Mount the light where people approach, with the sensor facing the path they take. Charge it in full sun for a full day before the first night, then wipe the panel every few months to keep it charging well.
Layering it with other outdoor lighting
A motion light covers arrivals and security, but a garden can also use soft, steady light. Path lights along a walkway or string lights over a patio give a welcoming glow, while the COB light switches on when someone approaches a door or a gate.
For more lights that switch on with movement, browse the motion sensor wall lights collection. For other wire free options, the outdoor solar wall lights collection has more choices.
You can use one for a single side door or several to cover a whole yard. Because each has its own panel and cable, every light can be placed independently, even on walls that face different ways.
Aim the light down toward the ground where people walk. That keeps it useful and avoids shining into neighbors' windows.
A roof or a high wall is often the sunniest spot on a home, and the long cable makes those spots usable. Just make sure you can reach the panel safely to wipe it clean now and then.
Before drilling, hold the panel in its planned spot at a few times of day, or simply watch where the sun falls across the house. A spot that is sunny in the morning but shaded by noon will charge less than one that gets sun through the middle of the day.
For care, wipe the light and panel with a soft, dry cloth. Keep the electrical connections dry, and avoid harsh chemical cleaners. Slight color variation can occur between screens and the product you receive.
Is the COB light right for your home?
It is a strong fit if you:
- Need light on a wall that gets little or no sun.
- Want motion activated light with no wiring to the house.
- Need to choose the output for a small or large area.
- Can route a cable neatly from the light to a sunny spot.
It may not be the right choice if you want a single piece light with no cable, or a decorative lantern for the front door. An integrated solar light or a porch lantern would suit you better.
All required hardware and assembly instructions are included. Shipping is free across the US, and most orders arrive in 6 to 9 business days. Buy 2 or more items and save 10%. Unused items in their original packaging can be returned within 30 days, and questions are answered at info@norafurnish.com.
