Waterproof Acrylic Mirror Light

The light over a bathroom mirror works harder than almost any other light in the home. It faces steam every day, gets switched on and off many times, and has to make faces look natural in a small room full of tile and glass. A fixture that ignores any of those demands tends to look tired quickly.

The Waterproof Acrylic Mirror Light is a simple, practical answer. It has a water resistant acrylic body, an acrylic shade that softens the light, and a built in LED, so there is no bulb to change. It comes in gold, silver or black, and in White Light, Warm White, or a combined White and Warm White option. The 15.7 inch version is 15.7 inches long, reaches 7.9 inches out from its wall bracket and is 2.2 inches deep.

What makes the acrylic mirror light stand out

Moisture resistance is the headline. Bathrooms fill with steam, and fixtures that are not built for it can dull, corrode or fail. The acrylic body is water resistant, which makes this a sensible choice for a family bathroom where the shower runs every morning.

The acrylic shade shapes the light. Instead of a bright point that glares off the mirror, the shade spreads the LED into a soft, even band. That is what makes the light kind to your face while you shave, brush your teeth or put on makeup.

The reach is useful too. At 7.9 inches out from the wall bracket, the light is carried forward over the mirror, so it falls onto your face rather than straight down the glass. That small projection makes a real difference to how evenly you are lit.

The built in LED keeps things simple. There are no sockets to fill, no bulb shapes to match, and no bulb to replace on a ladder. The fixture is also slim at 2.2 inches deep, so it looks tidy over a mirror or a mirror cabinet.

Finally, the finish and color choices let it fit in quietly. Gold warms up a bathroom with brass fittings, silver blends with chrome taps, and black gives a crisp modern outline. The light color options let you set the mood, from a clean white to a softer warm white, or both in one fixture.

Where it looks best, room by room

• Family bathroom. Over the main mirror, where steam is part of every morning.
• Ensuite. Above a mirror cabinet next to the shower.
• Powder room. A gold finish over a small mirror for a warm touch.
• Dressing table. A white light over a mirror for makeup and grooming.
• Laundry or utility room. A clean black fixture over a small mirror by the door.

The design is plain and modern, so it suits contemporary, minimal and transitional bathrooms. It pairs well with large format tile, frameless mirrors and floating vanities, and it does not compete with a patterned floor or a bold wall color.

Choosing the size and placement

The 15.7 inch version is 15.7 inches long, reaches 7.9 inches out from the wall bracket and is 2.2 inches deep. Other lengths in this listing vary in size, so check the Dimensions section before you plan the wall.

• Match the mirror. A light slightly narrower than the mirror looks balanced and lights the whole face.
• Center it. Mount it centered over the mirror or the sink so both sides of your face get even light.
• Check the reach. The 7.9 inch projection must clear a cabinet door or a deep mirror frame.
• Keep it away from spray. Even though the body resists water, mount it clear of direct spray from a shower head.
• Keep it level. Mark the bracket screws with a level before drilling, since a tilt is easy to spot on a straight bar.

The light connects to the wiring behind the wall rather than plugging in. Switch off the breaker before you start, and have an electrician run a supply if there is none at that point.

If you are fitting it over a mirror cabinet, open the door fully before fixing the bracket. The reach that carries light forward can also meet a door that swings up or out, so a quick test saves drilling twice.

Layering it with other lighting

A mirror light is task lighting, meant for the moments you stand at the sink. Pair it with a ceiling light for general light, and in a larger bathroom add a soft accent light for a calm evening bath.

The light color helps the layers work together. Warm White blends with the warm bulbs used in most homes and feels relaxed at night. White Light is crisper and suits grooming and makeup. The combined White and Warm White option gives you both, so the same fixture can be bright for the morning and softer at night.

Browse the vanity lighting collection for other bar styles, or the mirror lights collection for more fixtures that sit over the glass.

For a coordinated look, match the finish to your taps and cabinet handles: gold with brass, silver with chrome, black with matte black fittings.

Is the acrylic mirror light right for your space?

This light is a strong fit if you:

• Want a mirror light built to handle a steamy bathroom.
• Prefer a built in LED with no bulbs to change.
• Like a slim, modern look in gold, silver or black.
• Want the option of white, warm white, or both.
• Have a wiring point above the mirror, or can have one added.

It is not the best choice if you want a vintage fixture with visible bulbs, or if you are renting and cannot change the wiring. A classic multi head vanity light or a plug in wall light will suit those needs better.

If you need the measurements of another length before ordering, send a note to info@norafurnish.com. Every order ships free across the US, most arrive in 6 to 9 business days, and unused items in their original packaging can be returned within 30 days.

Because the LED is built in, the fixture stays the same shape and brightness for as long as it is in use, with no mix of old and new bulbs to deal with.